Nail Gun Buying Guide

Hammers are great for removing nails, but nothing beats a nail gun for driving them in. Though you might think of nail guns as being the exclusive property of construction workers, there is a wide variety of nail guns on the market that are suitable for home use. Learn about your options and choose the nail that is right for you.

Nail Gun Size
One size does not fit all when it comes to nail guns. There's no universal nail gun that works with every kind of nail, so you'll need to match your nail gun to the kind of work you're doing.

Brad nailers are the smallest and least powerful nail guns. These nail guns typically run on batteries or electrical current and fire 18-gauge nails up to two inches in length. Brad nailers are great for crafts and hobbies, but they're not powerful enough for home repair, save for some limited use in putting up thin pieces of paneling.

Finish nail guns will fire 15- and 16-gauge nails up to 2 ½ inches long. If you're putting up moldings or decorative elements and nailing into blueboard or wood, these nail guns will get the job done. Dense woods, like oak, or hard wall surfaces, like concrete, may be too much for these nail guns to handle.

Framing guns are used for general construction. These are the heaviest and most powerful nail guns, and while they won't shy away from thicker, denser woods, they won't work if you're nailing into concrete or trying to set nails deep into hard sills. Framing nail guns will work with a variety of longer, thicker nails.

In addition to size, consider how a nail gun is loaded. Some use continuous coils of nails, while others have magazines that require specially designed refills. Be sure that the proper nail size is readily available for your nail gun.

Operation
Most nail guns use electricity or compressed air to drive nails. A handful of specialized nail guns use gunpowder or compressed gas for driving nails into concrete, but these are for commercial use and may require permits and licenses to operate.

The simplest choice is an electronic nail gun that runs on house current or batteries. Electronic nail guns typically use a spring-driven piston to provide the force needed to drive the nail. Corded nail guns offer more power than battery-operated models, but keep you leashed to a power outlet. A handful of commercial-grade nail guns that use rechargeable batteries are also available, and these are a good choice for roofing and exterior finish work where cords can be a nuisance.

Pneumatic nail guns use compressed air to fire a piston that drives the nail. They're far more powerful than electronic nail guns and tend to be more durable. But in order to use a pneumatic nail gun, you'll need an air hose and a source of compressed air. Air compressors run on gas or electricity and cost hundreds of dollars.

If you're a professional or you're building things to sell, the reliability and extra power of a pneumatic nail gun is worth the extra investment. Consider the weight of different nail guns and how you'll use them-a nail gun that's easy to use with flooring can be hard to handle if you're putting up siding. Home users should choose electric nail guns and look for models with just enough power to get the job done.

Safety Features
Thousands of people wind up in emergency rooms as a result of nail gun accidents each year. That makes it important to consider the safety features on any nail gun you're considering and to always wear eye protection when nailing.

Most nail guns use a dual-contact mechanism to prevent accidental firing. This system has a retractable tip in the nail gun's nose. Pulling the trigger won't fire a nail unless the tip of the nail gun is pressed against a solid surface. The main drawback to this system is that it's possible to keep the trigger squeezed and use the tip for firing.

A sequential firing mechanism is a safer choice. This system disables the nail gun's trigger after each nail is fired. To fire a nail, the nail gun's trigger must be released before the sensor in the tip will work. Although it takes a little longer to master a nail gun with sequential firing, this system prevents the injuries that can arise from walking around with the trigger squeezed.

Excess power is the other source of nail gun injuries. A nail gun that is too powerful for the job can fire a nail straight through soft pieces of wood or paneling or through wall boards. It's best to choose a nail gun that provides just enough power for the job, and always be certain there is something solid behind interior and exterior walls before firing.

Specialized Nail Guns
If you're installing hardwood flooring, choose a flooring nail gun. These are designed with the tip mounted at a 45-degree angle to ensure proper side nailing of floorboards and cleats. These nail guns are only available in pneumatic models because of the extra force needed to drive nails into hardwoods, but most of them will work with floor staples as well as nails.

Roof nailers are low-powered nail guns designed to work exclusively with wide-head roof nails. Available only in pneumatic models, these nail guns use long coils of roofing nails, which minimizes the time spent reloading.

Features
All nail guns will jam eventually, so choose a model that offers easy access to the feed tube so you can remove lodged nails. If you're buying a pneumatic nail gun, look for a hose connection that swivels to prevent the hose from twisting while you work.

Nail guns should offer a nail depth adjustment. This allows you to increase or decrease the nail gun's power as the job requires. For nail guns that work with multiple sizes, be sure that the feed will adjust to each size of nail that can be used.

Related Life123 Articles

Pneumatic nail guns are the most popular type of nail gun on the market. The pneumatic process delivers a larger driving force than any other type of nail gun.

Nails guns are designed to make short work of large projects. If any job could benefit from a nail gun, it's roofing. Deciding on a roofing nail gun is a matter of knowing which features are important for your particular job.

Frequently Asked Questions on Ask.com
More Related Life123 Articles

From hanging pictures to building tree houses, a hammer is an essential element of your toolbox. Hammers come in different styles and are made from different materials. There are many hammers for specific tasks, but a general-purpose hammer will be sufficient for most tasks.

Nail guns are one of the most efficiency tools on the market; some models are able to fire two to three nails a second. Their power can also pose a serious danger to home users. Before you buy a nail gun, learn how to avoid nail gun accidents.

Nail guns can make fast work of a large job. If you're framing an addition on your house or building a deck, a framing nail gun may be the right choice.

© 2014 Life123, Inc. All rights reserved. An IAC Company